Sales & Service Center

Covid-19 Update

Bochi North America has been deemed an essential business by the State of Michigan.

Our sales and service center is open and operational via phone or email. Currently we are not accepting visitors inside the building. For all questions or concerns please reach out via phone or email to receive assistance right away.

  • 734 272-5315
  • sales@bochi-us.com
  • 535 South Mansfield Street, Ypsilanti, Michigan 48197 USA

CS6240 Conventional Lathes

Affordable manual lathe
*Image is representative, actual size dependent on model number

Standard Machine Features

  • 3-Jaw chuck and adapter
  • 2 Lengths Available
  • Steady & Follow Rest
  • Full Length Chip Gaurd
  • 4 Station Tool Post
  • Gap bed

(Optional)

  • Taper Turning Attachment
  • Thread Chasing Dial
  • Live Center
  • Protective Cover for Turret and Chuck

** These options may reduce the maximum machining capacities

 CS6240-1000
CapacityMax. swing over bedØ400 [15.7″]
Max. swing in gap630mm [24.8″]
Effective length in gap240mm [9.4″]
Max. swing over slide220mm [8.6″]
Max. work piece length1000mm [39.3″]
Bed width390mm [15.3]
SpindleSpindle Thru-Hole52mm [2″]
Spindle noseISO702
Spindle speed (rpm)24 Step
9-1600rpm
Machine power7.5 kW [10hp]
TailstockQuill (Ø / travel)Ø75 [2.9″] / 150 [5.9″]
TaperMT#5
TurretStation4
Tool shank size25 x 25 [.98″ x .98″]
FeedUpper toolpost max. travel145mm [5.7″]
Lower toolpost max. travel320 m/min [125,989 ipm]
X axis feed93 sorts
0.012-2.73mm/rev
[0.0005-0.1 ipr]
Z axis feed93 sorts
0.028-6.43mm/rev
[0.001-0.25 ipr]
Thread48 sorts
0.5-224mm
Inch thread48 sorts
1/8″-72″
Module thread41 sorts
0.5-112πmm
DP thread41 sorts
1/4-56 DP
Misc.Coolant Pump Motor0.06 kw
Weight2050 kg [4,520 lb]
Size (L x W x H)2632 x 975 x 1230
[103.7″ x 38.4″ x 48.4″]

 CS6240-1500
CapacityMax. swing over bedØ400 [15.7″]
Max. swing in gap630mm [24.8″]
Effective length in gap240mm [9.4″]
Max. swing over slide220mm [8.6″]
Max. work piece length1500mm [59″]
Bed width390mm [15.3]
SpindleSpindle Thru-Hole52mm [2″]
Spindle noseISO702
Spindle speed (rpm)24 Step
9-1600rpm
Machine power7.5 kW [10hp]
TailstockQuill (Ø / travel)Ø75 [2.9″] / 150 [5.9″]
TaperMT#5
TurretStation4
Tool shank size25 x 25 [.98″ x .98″]
FeedUpper toolpost max. travel145mm [5.7″]
Lower toolpost max. travel320 m/min [125,989 ipm]
X axis feed93 sorts
0.012-2.73mm/rev
[0.0005-0.1 ipr]
Z axis feed93 sorts
0.028-6.43mm/rev
[0.001-0.25 ipr]
Thread48 sorts
0.5-224mm
Inch thread48 sorts
1/8″-72″
Module thread41 sorts
0.5-112πmm
DP thread41 sorts
1/4-56 DP
Misc.Coolant Pump Motor0.06 kw
Weight2250 kg [4,961 lb]
Size (L x W x H)3132 x 975 x 1230
[123.3″ x 38.4″ x 48.4″]

Request a Quote

Translate »